Valid N10-006 Dumps shared by NewPassLeader for Helping Passing N10-006 Exam! NewPassLeader now offer the newest N10-006 exam dumps, the NewPassLeader N10-006 exam questions have been updated and answers have been corrected get the newest NewPassLeader N10-006 dumps with Test Engine here: http://https://www.newpassleader.com/CompTIA/N10-006-exam-preparation-materials.html (745 Q&As Dumps, 30%OFF Special Discount: 30free )
NEW QUESTION NO: 7
A technician needs to install a server to authenticate remote users before they have access to corporate network resources when working from home. Which of the following servers should the technician implement?
A. DNSSEC
B. PPP
C. RAS
D. VLAN
E. NAT
Answer: C
Explanation/Reference:
Explanation:
NEW QUESTION NO: 8
A technician is tasked with connecting a router to a DWDM. The technician connects the router to the multiplexer and confirms that there is a good signal level. However, the interface on the router will not come up. Which of the following is the MOST likely cause?
A. The wrong wavelength was demuxed from the multiplexer.
B. The SFP in the multiplexer is malfunctioning.
C. There is a dirty connector on the fiber optic cable.
D. The fiber optic cable is bent in the management tray.
Answer: A
Explanation/Reference:
Explanation:
A multiplexer (or mux) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line. A demultiplexer (or demux) is a device taking a single input signal and selecting one of many data-output-lines, which is connected to the single input. Since the signal going in is good, the problem must be with the signal output. If the correct wavelength was demultiplexed, the interface will be displayed on the router.
NEW QUESTION NO: 9
The Chief Information Officer (CIO) of an organization is concerned that the current locally-hosted, software threat solution is not agile enough. The CIO points to specific examples of zero-day threats that have recently taken a day or more to receive patches. The IT team is tasked with finding a solution that has a better chance of stopping emerging threats and stopping zero-day threats more quickly. Which of the following solutions would have the BEST chance of meeting these goals?
A. Stateful firewall
B. Premise-based IDS
C. Host-based IDS
D. Cloud-based anti-malware
Answer: A
Explanation/Reference:
Explanation:
NEW QUESTION NO: 10
A system administrator has been tasked to ensure that the software team is not affecting the production software when developing enhancements. The software that is being updated is on a very short SDLC and enhancements must be developed rapidly. These enhancements must be approved before being deployed. Which of the following will mitigate production outages before the enhancements are deployed?
A. Implement an environment to test the enhancements.
B. Implement ACLs that only allow management access to the enhancements.
C. Deploy an IPS on the production network.
D. Move the software team's workstations to the DMZ.
Answer: A
Explanation/Reference:
Explanation:
Environments are controlled areas where systems developers can build, distribute, install, configure, test, and execute systems that move through the Software Development Life Cycle (SDLC). The enhancements can be deployed and tested in a test environment before they are installed in the production environment.
NEW QUESTION NO: 11
Which of the following 802.11g antennas broadcast an RF signal in a specific direction with a narrow path?
A. Omni-direction
B. Unidirectional
C. Patch
D. Yagi
Answer: B
Explanation/Reference:
Explanation:
NEW QUESTION NO: 12
Which of the following is an effect of the protocol mechanism QoS with reference to unified communication?
A. QoS enables the unified communication traffic compression algorithm to conserve bandwidth across the WAN.
B. QoS ensures that unified communication video service is delivered as high definition between the unified communication endpoints.
C. QoS prevents any degradation in the voice/video signal quality by tunneling the packets between the unified communication endpoints.
D. QoS ensures that real time traffic is not delayed between unified communication endpoints.
Answer: D
NEW QUESTION NO: 13
Which of the following connection types is used to terminate DS3 connections in a telecommunications facility?
A. 66 block
B. BNC
C. F-connector
D. RJ-11
Answer: B
Explanation/Reference:
Explanation:
A DS3 (Digital Signal 3) is also known as a T3 line with a maximum bandwidth of 44.736 Mbit/s. DS3 uses
75 ohm coaxial cable and BNC connectors.
NEW QUESTION NO: 14
Ann, a technician, connects a pair of switches using redundant links. When she checks the status of the links, one of them is not active, even when she changes ports. Which of the following MOST likely disabled the redundant connection to the other switch?
A. Spanning tree
B. IGRP routing
C. SSID mismatch
D. Port mirroring
Answer: A
Explanation/Reference:
http://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/5234-5.html
NEW QUESTION NO: 15
An organization is moving to a new datacenter. During the move, several technicians raise concerns about a system that could potentially remove oxygen from the server room and result in suffocation. Which of the following systems are they MOST likely discussing?
A. Fire suppression
B. Mantraps at the entry
C. HVAC
D. UPS and battery backups
Answer: A
Explanation/Reference:
Explanation:
Fire suppression systems are often deployed in server rooms to prevent a fire destroying all the I.T.
equipment. Different fire suppression systems work in different ways. Obviously a fire suppression system that sprays water onto the fire is no good for a server room as the water would do as much damage as the fire. A common fire suppression system used in server rooms is one that suppresses the fire by starving it of oxygen. One way the oxygen can be removed from the server room is to fill the server room with an inert gas such as carbon dioxide.
NEW QUESTION NO: 16
After upgrading a fiber link from 1Gbps, a network technician ran a speed test of the link. The test shows the link is not operating at full speed and connectivity is intermittent. The two buildings are 1.476ft (450m) apart and are connected using CM4 fiber and 10G SR SFPs. The fiber runs through the electrical and boiler rooms of each building. Which of the following is the MOST likely reason for the connectivity issue?
A. The wrong SFPs are being used
B. There is interference from the electrical room.
C. CM1 fiber should be used instead
D. There is heat from the boiler room
Answer: A
Explanation/Reference:
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-
455693.html
NEW QUESTION NO: 17
Which of the following default ports is associated with protocols that are connectionless?
A. 80
B. 443
C. 2427
D. 3389
Answer: C
Explanation/Reference:
Explanation: