Valid C2150-614 Dumps shared by NewPassLeader for Helping Passing C2150-614 Exam! NewPassLeader now offer the newest C2150-614 exam dumps, the NewPassLeader C2150-614 exam questions have been updated and answers have been corrected get the newest NewPassLeader C2150-614 dumps with Test Engine here: http://https://www.newpassleader.com/IBM/C2150-614-exam-preparation-materials.html (60 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 6

A Deployment Professional has detected a big spike in a customer's "Malware infection detected" rule that monitors their endpoint anti-virus solution. The spike happened over the weekend, but when the rule was checked, it was not changed. Since Monday morning, the rule has spiked and has not yet stopped generating offenses.
What was added to the customer's QRadar log sources that caused this problem?
A. Proxies
B. Flow Collectors
C. Domain Controllers
D. Guest network in their offices.
Answer: B
Explanation/Reference:
Rules perform tests on events, flows, or offenses. If all the conditions of a test are met, the rule generates a response.
QRadar QFlow Collector passively collects traffic flows from your network through span ports or network taps. The IBM Security QRadar QFlow Collector also supports the collection of external flow-based data sources, such as NetFlow.
References:
http://www.ibm.com/support/knowledgecenter/SS42VS_7.2.7/com.ibm.qradar.doc/shc_qradar_comps.html
http://www.ibm.com/support/knowledgecenter/SS42VS_7.2.7/com.ibm.qradar.doc/c_qradar_gs_rules.html

NEW QUESTION NO: 7
A customer has existing complex network infrastructure with many redundant links and the IP packets are taking different paths for inbound and outbound traffic. A Deployment Professional needs to configure SFlow.
What should be configured in IBM Security QRadar SIEM V7.2.7 to support this specific case?
A. Enable flow forwarding
B. Disable flow forwarding
C. Enable asymmetric flows
D. Disable symmetric flows
Answer: C
Explanation/Reference:
In some networks, traffic is configured to take alternate paths for inbound and outbound traffic. This routing is called asymmetric routing.
However, if you want to combine flows from multiple QRadar QFlow Collector components, you must configure flow sources in the Asymmetric Flow Source Interface(s) parameter in the QRadar QFlow Collector configuration.
The Yes option enables the QRadar QFlow Collector to recombine asymmetric flows.
The No option prevents the QRadar QFlow Collector from recombining asymmetric flows.
References: http://www.ibm.com/support/knowledgecenter/SS42VS_7.2.7/com.ibm.qradar.doc/ t_qradar_adm_config_qflow_col.html

NEW QUESTION NO: 8
A Deployment Professional needs to change the folder where automatic updates are downloaded.
Which Auto Update settings should be configured under Change Settings?
A. Basic Tab > Directory
B. Advanced Tab > Directory
C. Basic Tab > Download Path
D. Advanced Tab > Download Path
Answer: B
Explanation/Reference:
Configuring QRadar to install a local autoupdate file,
Procedure
1. Log in to the QRadar user interface.
2. Click the Admin tab.
3. Click the Auto Update icon.
4. Click Change Settings.
5. Select the Advanced tab.
6. In the Webserver field, type https://Console_IP_address/ Note: The trailing forward slash (/) is required. For example: https://10.10.10.10/
7. In the Directory field, leave the autoupdates/ configuration as the default value.
Etc.
References: https://www.ibm.com/developerworks/community/forums/html/topic?id=6ebb0c41-55cd-4994-
9946-ceaff9375e52

NEW QUESTION NO: 9
After creating a custom Log Source Extension to parse a Source IP address from this event snippet 'IP Address: (10.20.30.40), the Source IP is not being extracted from the payload.
The Log Source Extension is showing the following:
IP\sAddress:\s\((\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})
Which Regular Expression should be used to ensure the Source IP is parsed properly?
A. IP\sAddress:\s\((\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})\)
B. IP\sAddress\s\((\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})\)
C. IP\sAddress:\s\((\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}))
D. IP\sAddress:\s\((\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{13})\)
Answer: C

NEW QUESTION NO: 10
What is the procedure to configure basic system settings on an IBM Security QRadar V7.2.7 system once the System Configuration panel is accessed under the Admin Tab?
A. 1. System Settings > (Configure Settings) > Save
2. Admin Tab > Advanced > Deploy Changes
B. 1. Configure Settings > Save
2. Admin Tab > Advanced > Deploy Changes
C. 1. System Settings > (Configure Settings) > Save
2. Admin Tab > Advanced > Deploy Full Configuration
D. 1. Configure Settings > Save
2. Admin Tab > Advanced > Deploy Full Configuration
Answer: C
Explanation/Reference:
Procedure to configure system settings.
1. Click the Admin tab.
2. On the navigation menu, click System Configuration.
3. Click the System Settings icon.
4. Configure the system settings.
5. Click Save.
6. On the Admin tab menu, select Advanced > Deploy Full Configuration.
References: http://www.ibm.com/support/knowledgecenter/fr/SS42VS_7.2.1/com.ibm.qradar.doc_7.2.1/ t_qradar_adm_conf_sys_setting.html

NEW QUESTION NO: 11
A Deployment Professional is working with a new customer that wishes to deploy IBM Security QRadar SIEM V7.2.7 using a cloud solution.
Which two providers are officially supported for this functionality? (Choose two).
A. IBM cloud
B. SoftLayer
C. Microsoft Azure
D. Amazon Web Services
E. DigitalOcean Droplets
Answer: A,B
Explanation/Reference:
A: IBM QRadar on Cloud allows you to enjoy the benefits and customer support of IBM Security QRadar, but in a hosted deployment.
B: QRadar on Cloud has all the capabilities of IBM Security QRadar SIEM hosted in IBM SoftLayer.
References: http://www.ibm.com/support/knowledgecenter/SSKMKU/com.ibm.qradar.doc_cloud/ c_qradar_hosted_overview.html

NEW QUESTION NO: 12
A Deployment Professional is investigating an offense and decides that a custom property should be added to the event and the rule to make them more useful. Once is added, though, the rule stops firing.
What could be causing this problem?
A. The custom property was disabled.
B. The events are not being correlated.
C. The events were affected by the rule change.
D. The rule threshold for the previews conditions is not met.
Answer: D
Explanation/Reference:

NEW QUESTION NO: 13
A customer has a following data:

The customer wants the Deployment Professional to store this information in Reference Data in QRadar in order to:
Display the system's 'zone' in an AQL search result.

Test for the system's 'owner' in a rule test

Which type of Reference Data can fulfill both tasks?
A. Reference Table
B. Reference Set
C. Reference Map
D. Reference Map of Sets
Answer: B
Explanation/Reference:
A reference set is a set of elements that are derived from events and flows that occur on your network.
Examples of elements that are derived from events are IP addresses or user names.
After you create a reference set, you can create rules to detect log activity or network activity that is associated with the reference set. For example, you can create a rule to detect when an unauthorized user attempts to access your network resources. You can also configure a rule to add an element to a reference set when log activity or network activity matches the rule conditions. For example, you can create a rule to detect when an employee accesses a prohibited website and add that employee's IP address to a reference set.
Note: You can create the following reference data collection types:
Reference map
Reference map of sets
Reference sets
Reference map of maps
Reference table
Incorrect Answers:
C: In a Reference Map, data is stored in records that map a key to a value. For example, to correlate user activity on your network, you can create a reference map that uses the Username parameter as a key and the user's global ID as a value.
D: In a Reference Map of Sets, data is stored in records that map a key to multiple values. For example, to test for authorized access to a patent, you can create a Map of Sets that uses a custom event property for Patent ID as the key and the Username parameter as the value to populate a list of authorized users.
References: http://www.ibm.com/support/knowledgecenter/SSKMKU/com.ibm.qradar.doc/ c_qradar_adm_mge_ref_set.html

NEW QUESTION NO: 14
What is the impact on network bandwidth when selecting 'Global' on a rule instead of 'Local' in a distributed environment?
A. All events are sent to the QRadar Console for processing and therefore, the QRadar Console uses more bandwidth.
B. All matching events are sent to the QRadar Console for processing and therefore, the QRadar Console uses more bandwidth.
C. All events are sent to each QRadar Event Processor for processing and therefore, all Events Processors use more bandwidth.
D. All matching events are sent to each QRadar Event Processor for processing and therefore, all Event Processor use more bandwidth.
Answer: B
Explanation/Reference:
If you select Local, all rules are processed on the Event Processor on which they were received and offenses are created only for the events that are processed locally.
If you select Global, all matching events are sent to the QRadar Console for processing and therefore, the QRadar Console uses more bandwidth and processing resources.
References: http://www.ibm.com/support/knowledgecenter/SSKMKU/com.ibm.qradar.doc/ t_qradar_create_cust_rul.html

NEW QUESTION NO: 15
In IBM Security QRadar SIEM V7.2.7, the number of Aggregated Data Management Views were increased.
How many additional views were added?
A. 100
B. 120
C. 130
D. 170
Answer: D
Explanation/Reference:
The limit of 130 aggregated views has been reached in QRadar 7.2.6 and earlier. The number of aggregated data views was increased in QRadar 7.2.7 to 300 aggregated data views.
References: http://www-01.ibm.com/support/docview.wss?uid=swg21690762

NEW QUESTION NO: 16
You are tasked with configuring IBM Security QRadar SIEM V7.2.7 to pull a log file that generated daily at midnight from a custom application on a Microsoft© Windows Server.
Which log source protocol should be used to accomplish this task?
A. WinCollect MSRPC
B. WinCollect Agent
C. WinCollect Log File
D. WinCollect File Forwarder
Answer: B
Explanation/Reference:
A managed WinCollect deployment has a QRadar appliance that shares information with the WinCollect agent installed on the Windows hosts that you want to monitor. The Windows host can either gather information from itself, the local host, and, or remote Windows hosts.
Note: The WinCollect application is a Syslog event forwarder that administrators can use for Windows event collection with QRadar. The WinCollect application can collect events from systems with WinCollect software installed (local systems), or remotely poll other Windows systems for events.
References: http://www.ibm.com/support/knowledgecenter/SSKMKU/com.ibm.wincollect.doc/ c_wincollect_overview_new.html