http://https://www.newpassleader.com/IBM/C9510-401-exam-preparation-materials.html (75 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 6
A system administrator needs to create a cell for a test environment. The administrator uses the Profile Management Tool (PMT) to create the deployment manager profile using the advanced profile creation option and creates a custom profile using the typical profile creation option. The administrator examines the log files for the custom profile creation and sees an INSTCONFFAIL message indicating the deployment manager was not running during the custom profile creation.
How should the administrator fix this?
A. Delete the custom profile.
Start the deployment manager.
Create the custom profile again.
B. Start the deployment manager.
Use PMT to re-create the custom profile.
C. Use the syncNodecommand to synchronize the node.
D. Run the addNodecommand to federate the custom profile.
Answer: A
Explanation/Reference:
Deleting profiles. You can delete a profile using the manageprofiles command. If the command fails, you can delete the profile using operating system commands.
Before you begin: If a node within a profile is federated to a deployment manager, before you delete the profile, stop the node and remove the node from the deployment manager. Otherwise, an orphan node remains in the deployment manager.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/tpro_removeprofile.html

NEW QUESTION NO: 7
A system administrator is configuring the security of a new environment. The administrator has been asked to configure one LDAP server that has different sub-trees for business users and administration users.
What should the administrator do to implement the required security configuration?
A. Use Federated repositories and configure the supported entity types.
B. Use Stand-alone custom registry and configure the flat file implementation.
C. Install and configure a TAI (Trust Association Interceptor)
D. Configure a security domain for the stand-alone LDAP server.
Answer: A

NEW QUESTION NO: 8
In a test environment, a system administrator has configured an external HTTP server in the DMZ that is routing to a cluster of application servers. The administrator wants to achieve higher performance when routing and prioritizing incoming requests to the back-end cluster.
How can the system administrator achieve this task?
A. Configure a cluster of external HTTP servers.
B. Enable the prefer local option on the cluster members.
C. Set up a Caching Proxy server between the external web server and the application server.
D. Place an On Demand Router (ODR) between the external web server and the application servers.
Answer: D
Explanation/Reference:
References: https://www.ibm.com/developerworks/websphere/techjournal/1206_alcott/1206_alcott.html

NEW QUESTION NO: 9
A system administrator has installed WebSphere Application Server Network Deployment V8.5.5 using the silent installation process and needs the verify that the installation completed successfully.
What does the administrator need to do to verify a successful installation?
A. Launch the Installation Manager GUI, verify the installation by going to File -> View Installed Packages.
B. Run the command IBMIM listInstalledPackagesand check that the appropriate WebSphere Application Server package is listed.
C. Check for INSTCONFSUCCESSmessage at the end of the <WebSphere Application Server install directory><log directory>log.txtfile.
D. Use the installvercommand to compare the checksum of the product file to the correct checksum value in the bill-of-materials file and make sure that the checksums match.
Answer: A
Explanation/Reference:
You can verify successful installation of the product using the capabilities of IBM Installation Manager.
To verify installation of the product, you can use Installation Manager to find the product in the list of installed packages.
Perform one of the following actions:
* Launch the Installation Manager GUI, and verify the installation by going to File -> View Installed Packages.
Or
* Change the directory to the eclipse/tools subdirectory of the Installation Manager binaries location and run this command:
[AIX][HP-UX][Linux][Solaris]: ./imcl listInstalledPackages
[Windows] imcl.exe listInstalledPackages
This will display a list indicating which packages this Installation Manager has installed. For example:
com.ibm.websphere.ND.v85_8.5.0.20110203_0234
Incorrect Answers:
C: log.txt was used in earlier versions of WebSphere, but not in version 8.5.
References: https://www.ibm.com/support/knowledgecenter/SSAW57_8.5.5/
com.ibm.websphere.installation.nd.doc/ae/tins_install_ver.html

NEW QUESTION NO: 10
A system administrator has added a server cluster as a member of a service integration bus (SIB). The administrator needs to configure one messaging engine for each server in this cluster and to have a failover location for each messaging engine.
What should the administrator do to achieve the required design?
A. Configure a new messaging engine in each server to support failover.
B. Configure the data store for each messaging engine for each server in the cluster.
C. Select scalability with high availability as the messaging engine policy.
D. Create a core group policy to restrict each messaging engine to a particular server.
Answer: C
Explanation/Reference:
The scalability with high availability configuration ensures that there is a messaging engine for each server in a cluster, and that each messaging engine has a failover location.
Reference: http://www-01.ibm.com/support/knowledgecenter/SSCKBL_8.5.5/com.ibm.websphere.nd.doc/ ae/cjt1004_.htm

NEW QUESTION NO: 11
A system administrator in a bank was asked by business users to determine the most accessed JSP page in a web application at normal work load for marketing purpose.
Which tool should the administrator use to find the most used JSP page?
A. Performance and Diagnostic Advisor
B. IBM Support Assistant Data Collector
C. High Performance Extensible Logging Log Viewer
D. Tivoli Performance Viewer (TPV) summary reports
Answer: D
Explanation/Reference:
Summary reports are available for each application server.
Tivoli Performance Viewer provides the following summary reports for each application server:
The servlet summary lists all servlets that are running in the current application server. Use the servlet summary view to quickly find the servlet that consumes the most time and the applications that use them, and to determine which servlets are invoked most often.
Etc.
References: https://www.ibm.com/support/knowledgecenter/SSEQTJ_8.5.5/com.ibm.websphere.base.doc/ ae/uprf_tpvserverview.html

NEW QUESTION NO: 12
After collecting diagnostic trace from a server running under a cell, a system administrator noticed that the trace files contained sensitive information.
To avoid this issue in the future, what can the administrator do?
A. Configure entries in the ras.rawtracelist.properties.
B. Configure suppressSensitiveTracein the bootstrap.propertiesfile.
C. Clear the "Disable logging and tracing of potentially sensitive data" checkbox.
D. Add the entry com.ibm.websphere.logging.RawTraceList=offto the end of the trace string.
Answer: C
Explanation/Reference:
You can either enable or disable the sensitive log and trace guard to help control whether loggers write sensitive information in your log and trace files.
Use the administrative console to enable or disable the sensitive log and trace guard.
Procedure
1. Log on to the administrative console.
2. If you are using an administrative agent topology, then select a node that you want to manage, and navigate to it.
3. From the navigation section in the console, choose Troubleshooting > Logs and trace.
4. Select the server that you want to enable or disable with sensitive log and trace guard.
5. Click Change log detail levels.
6. Select the Disable logging and tracing of potentially sensitive data check box to enable sensitive log and trace guard. To disable sensitive log and trace guard, clear the Disable logging and tracing of potentially sensitive data check box.
7. Click OK
8. Save the changes.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/ttrb_enablesensitivelogtrace.html

NEW QUESTION NO: 13
Which one of the following options describes the runtime flow starting from the client browser in a clustered WebSphere Application Server Network Deployment topology?
A. HTTP server -> job manager -> admin agent -> HTTP server plug-in
B. Load balancer -> HTTP server -> HTTP server plug-in -> application server
C. Application server -> node agent -> deployment manager -> load balancer
D. Deployment manager -> node agent -> HTTP server plug-in -> HTTP server
Answer: B

NEW QUESTION NO: 14
A system administrator has created a Python script called globalScript. py.
What should the administrator do to ensure globalScript. py is loaded when the wsadmin shell is used?
A. Invoke wsadmin with the argument-profileName globalScript.py.
B. Modify the configureCustomProperty script to import globalScript. py.
C. Compile globalScript.py to a Java class in the bin directory.
D. Set the script profiles in the wsadmin.properties file to load globalScript .py.
Answer: D

NEW QUESTION NO: 15
Within a WebSphere Application Server Network Deployment cell, a system administrator needs to write a script to determine if a particular server is stopped. It is important that the wsadminscript explicitly return a status of stoppedas opposed to just failing.
What wsadminobject should the administrator use to write this script?
A. AdminApp
B. AdminTask
C. AdminConfig
D. AdminControl
Answer: D
Explanation/Reference:
Use the AdminControl object to invoke operational commands that manage objects for the application server.
Many of the AdminControl commands have multiple signatures so that they can either invoke in a raw mode using parameters that are specified by Java Management Extensions (JMX), or by using strings for parameters. In addition to operational commands, the AdminControl object supports some utility commands for tracing, reconnecting with a server, and converting data types.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/rxml_admincontrol.html

NEW QUESTION NO: 16
A system administrator decides to use the advice from the Performance and Diagnostic Advisor to identify the optimum connection pool settings for data sources. In a cell, the data source db2datasource is defined under node scope and used by two servers from that node. The administrator receives two different sets of advice for db2datasource.
One set of advice suggests to increase the maximum connection pool sizefor db2datasource.

The other suggests reducing the maximum connection pool sizefor db2datasource.

How should the administrator configure the data sources before reusing the Performance and Diagnostic Advisor?
A. Create a data source of the same name under cell scope.
B. Create a data source of the same name under server scope for each server.
C. Increase the minimum connection pool sizefor the data source.
D. Decrease the maximum connection pool sizefor the data source.
Answer: B
Explanation/Reference:
References: https://www.ibm.com/support/knowledgecenter/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ ae/cprf_rpa.html