http://https://www.lead1pass.com/Microsoft/70-342-practice-exam-dumps.html (240 Q&As Dumps, 30%OFF Special Discount: 30free )
NEW QUESTION NO: 6
You have an Exchange Server 2010 organization.
You need to ensure that users in the organization are notified before they send email messages to external recipients.
Which cmdlet should you run?
A. Set-TransportAgent.
B. Set-OrganizationConfig.
C. Set-Mailbox.
D. Set-TransportConfig.
Answer: B
NEW QUESTION NO: 7
You have an Exchange Server 2013 organization.
You need to ensure that a user named User1 can prevent the deletion of every email message that contains a specific word from all of the mailboxes. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. Add User1 to the Records Management management role group. Instruct User1 to run the New- ManagedContentSettings cmdlet.
B. Add User1 to the Records Management management role group. Instruct User1 to run the New- MailboxSearch cmdlet.
C. Add User1 to the Discovery Management management role group. Instruct User1 to run the New- ManagedContentSettings cmdlet.
D. Add User1 to the Discovery Management management role group. Instruct User1 to run the New- MailboxSearch cmdlet.
Answer: D
Explanation/Reference:
Explanation:
* If you want users to be able to use Microsoft Exchange Server 2013 In-Place eDiscovery, you must first authorize them by adding them to the Discovery Management role group. Members of the Discovery Management role group have Full Access mailbox permissions for the Discovery mailbox that's created by Exchange Setup.
* The New-MailboxSearch cmdlet creates an In-Place eDiscovery search or an In-Place Hold. Unless specified, mailboxes on all Exchange 2013 servers in an organization are searched. You can stop, start, modify, or remove the search.
NEW QUESTION NO: 8
DRAG DROP
Your company has two offices. Each office is configured as an Active Directory site. The sites are named Site1 and Site2.
You have an Exchange Server 2013 organization that is configured as shown in the following exhibit. (Click the Exhibit button.)
Datacenter Activation Coordination (DAC) mode is enabled on the database availability group (DAG) named DAG1.
You are testing a site failover by shutting down all of the servers in Site1.
You need to mount the databases in Site2.
Which three commands should you run in sequence? (To answer, move the appropriate three commands from the list of commands to the answer area and arrange them in the correct order.) Select and Place:
Answer:
NEW QUESTION NO: 9
You implement the UM pilot.
You capture and analyze a network trace from the IP-PBX.
You discover that SIP/MTLS requests for TCP 5061 to EX1 are dropped.
You need to ensure that the IP-PBX can route calls successfully to the Exchange Server 2013 organization.
What should you do?
A. Modify the IP-PBX to route calls to EX5 and EX6.
B. Modify the SIP listening port on EX1.
C. Deploy a server that has Exchange Server 2010 and the Unified Messaging server role installed.
D. Modify the port used on the IP-PBX.
Answer: A
NEW QUESTION NO: 10
You have an Exchange Server 2010 organization that contains three servers. The servers are configured as shown in the following table.
Microsoft Outlook is configured to connect to an FQDN of mail.adatum.com. Mail.adatum.com resolves to the IP address of a Layer 7 hardware load balancer. The hardware load balancer is configured to send traffic to EX2 and EX3.
You deploy an Exchange Server 2013 Mailbox server named EX4 and an Exchange Server 2013 Client Access server named EX5.
You plan to migrate all mailboxes to Exchange Server 2013.
You need to recommend a solution to ensure that users can access their mailbox on EX1 or EX4 during the migration.
What should you do?
A. Create a Client Access server array that contains EX1 and EX5.
B. Modify the autodiscover.contoso.com resource record to point to EX5.
C. Modify the properties of the hardware load balancer to point to EX5.
D. Create a DNS record named legacy.contoso.com in the internal DNS zone.
Answer: C
Explanation/Reference:
Note: So what is the Client Access server in Exchange 2013? The Client Access server role is comprised of three components, client protocols, SMTP, and a UM Call Router. The CAS role is a thin, protocol session stateless server that is organized into a load balanced configuration. Unlike previous versions, session affinity is not required at the load balancer (but you still want a load balancer to handle connection management policies and health checking). This is because logic now exists in CAS to authenticate the request, and then route the request to the Mailbox server that hosts the active copy of the mailbox database.
The Mailbox server role now hosts all the components and/or protocols that process, render and store the data. No clients will ever connect directly to the Mailbox server role; all client connections are handled by the Client Access server role.
Reference: Exchange 2013 Server Role Architecture
NEW QUESTION NO: 11
DRAG DROP
Contoso, Ltd., is a bank that has offices in North America and Europe.
The company must comply with different regulations for North America and Europe.
The company uses Information Right Management (IRM) to protect sensitive documents, such as internal financial reports.
You need to recommend a compliance solution to meet the following requirements:
Prevent users from disclosing customers' personal information in email messages.
Prevent users from disclosing internal financial data to people outside of the company.
Prevent the permanent deletion of email messages of users who are under investigation.
Allow compliance officers to search the mailbox of users who are under investigation without being able
to alter the data in the mailbox.
Which technology should you recommend for each requirement?
To answer, drag the appropriate technology to the correct requirement in the answer area. Each technology may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Select and Place:
Answer:
NEW QUESTION NO: 12
Your company has a hybrid deployment of Exchange Server 2013 and Microsoft Office 365.
All recipients have an SMTP suffix of contoso.com.
You discover that all of the email messages sent to the Internet from users who have Office 365 mailboxes are routed through the on-premises Exchange servers.
You need to ensure that all of the email messages are sent directly to the Internet.
What should you do?
A. Modify an organization relationship.
B. Create a new routing group connector.
C. Create a new transport rule.
D. Run the Hybrid Configuration wizard.
Answer: D
Explanation/Reference:
Explanation:
Creating and configuring a hybrid deployment with the Hybrid Configuration wizard is now a single process in Microsoft Exchange Server 2013.
The wizard allows you to select and configure Client Access or Edge Transport servers to handle secure mail transport between the on-premises and Exchange Online organizations.
The wizard configures on-premises Client Access servers and Microsoft Exchange Online(EOP) on your Office 365 organization for hybrid mail routing. By configuring new and existing Send and Receive connectors in the on-premises organization and Inbound and Outbound connectors in EOP, the wizard allows you to choose whether outbound messages delivered to the Internet from the Exchange Online organization will be sent directly to external mail recipients or routed through your on-premises Exchange servers included in the hybrid deployment.
Reference: Hybrid Configuration wizard
NEW QUESTION NO: 13
You are evaluating the implementation of the planned static IP addresses for DAG1.
You need to identify the appropriate IP addresses for DAG1.
Which two IP addresses should you identify? (Each correct answer presents part of the solution. Choose two.)
A. 169.254.0.10
B. 192.168.1.10
C. 192.168.2.10
D. 192.168.10.10
E. 192.168.20.10
F. 224.0.0.10
Answer: B,D
Explanation/Reference:
Explanation:
* Scenario:
Assign a static IP address to DAG1.
A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and EX6. DAG1 is
configured to use DHCP to obtain an IP address.
Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are assigned as the MAPI network.
* A DAG network is a collection of one or more subnets used for either replication traffic or MAPI traffic.
Each DAG contains a maximum of one MAPI network and zero or more replication networks.
NEW QUESTION NO: 14
You have an Exchange Server organization. The organization contains servers that have either Exchange Server 2010 or Exchange Server 2013 installed.
You hire a new helpdesk technician named helpdesk1. Helpdesk1 is a member of the Recipient Management management role group.
You discover that helpdesk1 created nine new mailbox-enabled users by using the New-Mailbox command.
You need to identify which management role provides helpdesk1 with the permissions to create new mailbox-enabled users.
Which cmdlets should you run?
A. Get-ManagementRoleEntry and Get-ManagementRoleAssignment
B. Get-RolegroupMember and Get-ManagementRoleAssignment
C. Get-ManagementRoleEntry and Get-RoleGroup
D. Get-Rolegroup and Get-RoleGroupMember
Answer: A
Explanation/Reference:
Explanation:
* Use the Get-ManagementRoleEntry cmdlet to retrieve management role entries that have been configured on management roles.
* Use the Get-ManagementRoleAssignment cmdlet to retrieve management role assignments.
NEW QUESTION NO: 15
HOTSPOT
You have an Exchange Server 2013 organization.
All users are enabled for Unified Messaging (UM) and access their voice mail by using Microsoft Lync
2010.
Callers report that when they press a key to dial an external telephone number, they hear a message indicating that the intended destination cannot be reached.
You need to ensure that the callers can reach the external number successfully.
What should you modify?
To answer, select the appropriate object in the answer area.
Hot Area:
Answer:
Explanation/Reference:
Note:
After you create a Unified Messaging (UM) dial plan, you can view and configure a variety of settings. For example, you can configure the level of Voice over IP (VoIP) security, the audio codec, and dialing restrictions. The settings that you configure on the UM dial plan affect all users who are linked with the dial plan through a UM mailbox policy.
NEW QUESTION NO: 16
You have an Exchange Server 2013 organization.
You need to create a single transport rule that prevents users in a group named Group1 from exchanging messages with users in a group named Group2.
Which two options should you use?
To answer, select the two appropriate options in the answer area.
Hot Area:
Answer:
Explanation/Reference:
Explanation:
Transport rule conditions and exceptions are used to define when a transport rule is applied.
Conditions include:
* The sender is a member of
This condition matches messages where the sender is a member of the specified distribution group.
* The recipient is a member of
This condition matches messages that contain recipients who are members of the specified distribution group. The distribution group can be listed in the To, Cc, or Bcc fields.