http://https://www.lead1pass.com/IBM/C9530-001-practice-exam-dumps.html (62 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 6
A developer is migrating SOA based applications to IBM Integration Bus Toolkit. There are existing WSDL files that are available to the developer. Which solution type should the developer select?
A. Application
B. Integration Project
C. Integration Service
D. Pattern Authoring Project
Answer: C
Explanation/Reference:
Explanation:
You can define a service interface and implement its operations to create an integration service based on WSDL in IBM Integration Bus.
Note: To create an integration service based on existing WSDL, complete the following steps:
1. Open the New Integration Service wizard by using one of the following methods:
2. Enter a name for the integration service, and optionally a description.
3. Select Create a service interface by selecting an existing WSDL file, and click Next.
4. Select existing WSDL from your workspace, or from an external location, and click Next.
5. Select the WSDL bindings to import, and click Next to view any warnings, or click Finish. You can import only a SOAP over HTTP binding. An integration service is created with the operations defined in the imported WSDL, and is shown in the service editor. You can expand the integration service in the Application Development view to view operations and associated resources.
6. Implement the operations that are defined in your service interface
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc19314_.htm

NEW QUESTION NO: 7
Given the following set of applications and libraries, which are all deployed to the same Integration Server, what must be done to provide a new version of the MasterSchema.xsd file to AppA and AppB?

A. Deploy the new version of the MasterSchema.xsd file to the Integration Server.
B. Place the new version of MasterSchema.xsd in the MasterLibrary and deploy the MasterLibrary to the Integration Server.
C. Place the new version of MasterSchema.xsd in the MasterLibrary and then redeploy the AppA and AppB applications to the Integration Server.
D. Place the new version of MasterSchema.xsd directly in AppA and AppB and then redeploy the AppA and AppB applications to the Integration Server.
Answer: A
Explanation/Reference:
Explanation:
If you update and redeploy a shared library, all applications that reference that shared library see the updates automatically.
Note: If you update a static library, you must repackage and redeploy each application that references that library, unless applications need to use different versions of that library.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ bc23066_.htm

NEW QUESTION NO: 8
A developer is trying to investigate slow processing times with a specific message flow. What tool would be used to investigate this?
A. Service trace
B. Debug mode
C. Resource Statistics
D. Accounting and Statistics
Answer: C
Explanation/Reference:
Explanation:
You can use the message flow statistics data to help you identify aspects of a message flow that might be reducing the performance of the flow, and to help you understand how you can optimize it.
If you detect that system resources are under pressure, you can examine the statistics collected by the broker to assess whether the cause of the concern is the use of those resources by processes in IBM Integration Bus.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bj43310_.htm

NEW QUESTION NO: 9
On a Linux system, trace node is configured with Destination set to a file. The trace node should be executed if a message processes successfully. A message is processed through the Integration flow successfully but no file is written. How can the problem be determined?
A. This error only happens if the file system is full.
B. Check the console logs (stderr/stdout) for any errors.
C. The only way to debug this problem is to start the flow debugger.
D. Check the local system error logs to see if there were any errors encountered while writing to the trace node output file.
Answer: D
Explanation/Reference:
Note: Set the destination of the trace record that is written by the node to User Trace, Local Error Log, or File.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ ag66270_.htm

NEW QUESTION NO: 10
In the following diagram an input message comes in that does not match any of the routing rules. The default terminal of the Route Node is not wired and the failure terminal of the Route node is wired to ROUTE FAIL. Where does the message go?

A. To the Failure queue.
B. Nowhere, it is discarded.
C. To the dead letter queue.
D. To the ROUTE FAIL queue.
Answer: B
Explanation/Reference:
Explanation:
If the Route node default terminal is left unwired, so that operations are not routed to any export-reply subflow.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/ com.ibm.etools.mft.conversion.esb.doc/bm34352_.htm

NEW QUESTION NO: 11
What is the result of the command mqsisetdbparms -n DB2_1 -u test -p test123?
A. Creates a security identity for DB2_1.
B. Sets the database parameters test and test123 for DB2_1.
C. Connects to the database DB2_1 with user test and password test123.
D. Creates service userld "test" and password "test123" for the Integaration node "DB2_1".
Answer: A
Explanation/Reference:
Explanation:
Use the mqsisetdbparms command to associate a specific user ID and password (or SSH identity file) with one or more resources that are accessed by the broker.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ an09155_.htm

NEW QUESTION NO: 12
An IBM Integration Bus Administrator has configured the configurable services DataCaptureStore, DataCaptureSource and DataDestination and ensured the WebUI users are setup correctly. However, when running messages through the Integration flow, nothing gets recorded into the database. What could be the missing step in the configuration of the message flow?
A. The Integration flow was not started.
B. The Integration flow was not deployed.
C. The monitoring events were not created/enabled.
D. The recording was not enabled using the command mqsichangeflowrecording.
Answer: C
Explanation/Reference:
To configure monitoring on a message flow to emit events for capture, use one of the following methods.
Configure and enable event sources, and activate monitoring for the message flow, by completing the

steps in Business-level monitoring.
Configure monitoring event sources by using the sample monitoring profile that is provided at

install_dir/sample/RecordReplay/basicMonitoringProfile.xml.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bj23700_.htm

NEW QUESTION NO: 13
Which type of container can allow for runtime isolation, ensuring that updates to one group of deployed resources do not affect another group?
A. Application
B. MessageSet
C. Shared Library
D. Dynamic Library
Answer: A
Explanation/Reference:
Explanation:
Applications provide runtime isolation whereby resources inside the application are not visible to other resources, such as message flows, libraries, or other applications that are running outside the application.
Consider using applications if you need to ensure that updates to one group of deployed resources do not affect another group. For example, use an application when you want to control which flows pick up the latest version of an ESQL module.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc23060_.htm

NEW QUESTION NO: 14
What is the first step in creating an IBM Integration Bus (IIB) based pattern?
A. Every new application may require a pattern. So start with creating a pattern project.
B. Identify an exemplar project and the variants to be replaced in the generated instance.
C. Create a Java class that may be used in the pattern generation for changing the default behavior.
D. Investigate how to create eclipse plugin since the IIB patterns are built as eclipse plugins for the toolkit.
Answer: B
Explanation/Reference:
Explanation:
The three stages of creating a user-defined pattern are performed by the IBM Integration Bus developer, the pattern author, and the pattern user.
1. The IBM Integration Bus developer develops the exemplar. The exemplar is fundamental to the pattern authoring process. It assumes that the exemplar is the starting point for a pattern. Some modifications might be required to the exemplar to prepare it for pattern authoring.
2. The pattern author creates a pattern plug-in from the exemplar.
3. The pattern user receives a user-defined pattern, customizes it, and uses it in accordance with the requirements of the organization.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc68380_.htm

NEW QUESTION NO: 15
Which statement about the DFDL parser and domain is true?
A. The DFDL parser is not an on-demand parser.
B. DFDL domain is not intended for general text and binary message formats.
C. DFDL domain is intended for parsing and writing XML or JSON formatted messages.
D. The DFDL parser interprets a bit stream by using grammar defined in a DFDL schema file.
Answer: A
Explanation/Reference:
Explanation:
The DFDL parser is model-driven.
Incorrect Answers:
B: IBM Integration Bus provides support for a DFDL domain. The DFDL domain can be used to parse and write a wide variety of message formats, and is intended for general text and binary message formats, including industry standards.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc40130_.htm

NEW QUESTION NO: 16
In the RegistryLookup and EndpointLookup nodes, there are three JNDI related configuration properties:
connectionFactoryName, initialContextFactory and locationJNDIBinding. What are these configuration properties used for?
A. To define the JMS entries for cache notification.
B. To specify where the result of the query should be saved in JNDI.
C. To specify how to access WebSphere Service Registry and Repository (WSRR) in order for the nodes to submit a query.
D. To define the location of the administrative objects for the WebSphere Service Registry and Repository (WSRR).
Answer: C
Explanation/Reference:
Explanation:
The WebSphere Service Registry and Repository (WSRR) is a central repository of entities. The WebSphere Service Registry and Repository (WSRR) is a central repository of entities.
Use the WSRR nodes (the RegistryLookup and EndpointLookup nodes) to create message flows that retrieve data dynamically from WSRR. Use the WSRR nodes (the RegistryLookup and EndpointLookup nodes) to create message flows that retrieve data dynamically from WSRR. Use the EndpointLookup node to submit queries for Web service endpoints.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ ac56060_.htm