http://https://www.examslabs.com/IBM/IBM-Certified-System-Administrator/best-C9510-418-exam-dumps.html (65 Q&As Dumps, 30%OFF Special Discount: bmzblwH7 )

NEW QUESTION NO: 5
An administrator is using the Guided Troubleshooter in the IBM Support Assistant to troubleshoot IBM WebSphere Application Server issues. After going through data collection and analysis, no reliable solution is found.
What is the administrator's best next step?
A. Submit results to the IBM WebSphere Application Server forum for a quick response from other forum users.
B. Use the Guided Troubleshooter to open a service request with IBM, so all the troubleshooting data analyzed so far is uploaded automatically.
C. Open a new PMR with IBM and upload SystemOut.log from the IBM WebSphere Application Server.
D. Call in a new PMR with IBM and upload Troubleshooter data to ECuREP.
Answer: B

NEW QUESTION NO: 6
Which of the following is true about certificate expiration monitoring?
A. Must be run manually.
B. Must be run on the deployment manager.
C. Deletes the certificates after they are expired, but does not replace them.
D. Can replace expired certificates or certificates in the expiration threshold with a new certificate
Answer: D
Explanation/Reference:
Certificate monitor configuration settings can be configured on the administrative console by selecting Security > SSL certificate and key management > Manage certificate expiration. . On the Manage certificate expiration panel, you can perform the following functions.
Set the expiration threshold in the box labeled Expiration replacement threshold. The expiration

replacement threshold is the number of days before a certificate expiration that a certificate can be replaced and has a default value of 60 days.
Delete the certificates after they are replaced by selecting the Delete expiring certificates and signers

after replacement box. This box is selected by default.
Etc.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_7.0.0/ com.ibm.websphere.nd.doc/info/ae/ae/csec_sslcertmonitoring.html

NEW QUESTION NO: 7
Which type of fix would typically be downloaded to address a specific problem?
A. Interim fix
B. Cumulative fix
C. Product fix pack
D. Cumulative interim fix
Answer: A
Explanation/Reference:
A WebSphere Commerce interim fix (iFix) is a software patch that contains fixes for one or more APARs. A WebSphere Commerce cumulative iFix is a comprehensive collection of interim fixes for a specific release.
Both types of fixes are installed with the WebSphere Commerce Update Installer (UPDI).
Note: An Authorized Program Analysis Report, or APAR, is a formal report from IBM development to customers that have notified IBM of a problem or suspected defect. If IBM development is able to confirm the existence of the issue they will create an APAR with any known work around and perhaps an indication of which future release, if any, of the IBM program they intend to target for a formal fix to the defect and whether or not a Program Temporary Fix (PTF) is planned. The APAR will then be published so that it is visible to supported customers.
References: https://www.ibm.com/support/knowledgecenter/en/SSZLC2_7.0.0/ com.ibm.commerce.install.doc/concepts/cig_install_ifixes.htm

NEW QUESTION NO: 8
Which statement is true about a request made from a browser for a jsp running in an application server?
A. The HTTP server plug-in loaded with the embedded HTTP server within the application server forwards the request to the application server.
B. The plug-in configuration file loaded with the embedded HTTP server within the application server forwards the request to the application server.
C. The HTTP server plug-in loaded with the HTTP server forwards the request to the embedded HTTP server within the application server. The embedded server forwards the request into the web container.
D. The plug-in configuration file loaded with the HTTP server forwards the request to the embedded HTTP server within the application server. The embedded server forwards the request into the web container.
Answer: A
Explanation/Reference:
When IBM HTTP Server receives a request for a JSP file, it passes the request to WebSphere Application Server - Express's servlet engine, which calls the JSP processor. The JSP processor is an internal servlet which converts a JSP file into Java source code and compiles it. The servlet that implements the JSP processor is org.apache.jasper.runtime.JspServlet.
References: https://www.ibm.com/support/knowledgecenter/en/ssw_i5_54/rzamy/50/program/jspdef.htm

NEW QUESTION NO: 9
Which of the following statements is true regarding the relationship of nodes and node groups?
A. Nodes can belong to only one node group.
B. Nodes managed by a node group cannot be deleted.
C. All nodes are initially not associated with a node group.
D. All nodes are initially associated with a default node group.
Answer: D
Explanation/Reference:
D: a node must be a member of a node group. Initially, all Application Server nodes are members of the default DefaultNodeGroup node group.
Note: A node group is a collection of managed nodes.
Incorrect Answers:
A: A node can be a member of more than one node group.
C: A node must be a member of a node group. Initially, all Application Server nodes are members of the default DefaultNodeGroup node group.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/cagt_node_group.html

NEW QUESTION NO: 10
What are two automated administrative tasks that can be done with configuration checkpoints? (Select two.)
A. delete
B. restore
C. archive
D. backup
E. compress
Answer: A,D
Explanation/Reference:
If you want to preserve delta checkpoints, you must archive checkpoints before they are automatically deleted.
A delta checkpoint is created automatically by the product each time a configuration change is made.
Incorrect Answers:
C: The product does not have an automated function for archiving.
References: https://www.ibm.com/support/knowledgecenter/SSEQTP_8.5.5/
com.ibm.websphere.base.doc/ae/twve_archive_checkpoint.html
https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/ cwve_xdsochckpt.html

NEW QUESTION NO: 11
When adding a repository to a federated repository configuration, which type of repository can be added only using wsadmincommands?
A. File repository
B. LDAP repository
C. SAML repository
D. Database repository
Answer: D
Explanation/Reference:
Federated repositories
Supports multiple types of repositories such as file-based, LDAP, database, and custom. In WebSphere Application Server Version 8.5, file-based and LDAP repositories are supported by the administrative console. For database and custom repositories, you can use the wsadmin command-line interface or the configuration application programming interfaces (API).
References:
https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/ cwim_fedrepos.html

NEW QUESTION NO: 12
An administrator wants to verify an IBM WebSphere Application Server installation by examining the installation's directory structure. In this example, <WAS_installation_directory>indicates the installation's root directory.
What is one directory tree structure that indicates a successful installation of the product files?
A. <WAS_installation_directory>/web
B. <WAS_installation_directory>/bin
C. <WAS_installation_directory>/profiles
D. <WAS_installation_directory>/installableApps
Answer: C
Explanation/Reference:
WebSphere Application Server Version 8.5.5 for Network Deployment:
/QIBM/UserData/WebSphere/AppServer/V85/ND/profiles/wp_profile/PortalServer References: https://www.ibm.com/support/knowledgecenter/en/SSYJ99_8.5.0/reference/wpsdirstr.html

NEW QUESTION NO: 13
When setting up high availability settings for the web server, at what level should an administrator configure the custom properties?
A. cell
B. node
C. server
D. nodeagent
Answer: C
Explanation/Reference:
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.multiplatform.doc/ae/xrun_jvm.html

NEW QUESTION NO: 14
In addition to logging changes, what can Cross Component Trace capture?
A. The user agent of the browser that has initiated the request.
B. The last time that the component was updated by a code deploy.
C. The time that the component was started in the application server.
D. Data snapshots that store entire request and response bodies on the file system.
Answer: C
Explanation/Reference:
Cross Component Trace (XCT) annotates the logs so that log entries that are related to a request that is serviced by more than one thread, process, or even server are identified as belonging to the same unit of work.
XCT log records are typically added to the logs to:
demarcate the beginning and ending of work for a particular request on a particular thread.

demarcate when work is about to be transferred to another thread or process, or to indicate when work

returned from another thread or process.
demarcate when work moves from major component to major component, even if work continues on

the same thread; for example to show transfer of control from application server code to application code.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/ctrb_XCTOverview.html

NEW QUESTION NO: 15
Assuming there are no custom properties defined in current plugin-cfg.xml file, what should be done before running the GenPluginCfgcommand?
A. Delete the global plugin-cfg.xmlin the <profile_root>/config/cellsdirectory.
B. Delete the current plugin-cfg.xmlin the <profile_root>/config/cellsdirectory.
C. Clear the Enable automated web server configuration processingoption in the web server plugin configuration service.
D. Use either the Integrated Solutions Console or the ConfigurewebServerDefinition.jaclscript to create a web server definition.
Answer: B
Explanation/Reference:
Delete the plugin-cfg.xml file in the profile_root/config/cells directory before you use the GenPluginCfg command. Otherwise, configuration changes do not persist to the plugin-cfg.xml file. However, do not delete the plugin-cfg.xml file if you have custom properties that you previously set in it that you need to persist.
Note: You can update the global plugin-cfg.xml file using the administrative console or running the GenPluginCfg command for all of the clusters in a cell. However, you must delete the config/cells/plugin- cfg.xml file before you update the global plugin-cfg.xml file. If you do not delete the config/cells/plugin- cfg.xml file, only the new properties and their values are added to the global plugin-cfg.xml file. Any updates to existing plug-in property values are not added to the global plugin-cfg.xml file.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/ com.ibm.websphere.nd.doc/ae/rxml_genplugincfg1.html