Let me be clear here a core value problem of BraindumpsQA. All Cisco exams are very important. In this era of rapid development of information technology, BraindumpsQA just one of the questions providers. Why do most people to choose BraindumpsQA ? Because the BraindumpsQA 400-101 exam information will be able to help you pass the test. It provides the information which is up to date. With BraindumpsQA Cisco 400-101 test questions, you will become full of confidence and not have to worry about the exam. However, it lets you get certified effortlessly.

If you want to buy Cisco 210-065 exam information, BraindumpsQA will provide the best service and the best quality products. Our exam questions have been authorized by the manufacturers and third-party. And has a large number of IT industry professionals and technology experts, based on customer demand, according to the the outline developed a range of products to meet customer needs. Cisco 210-065 exam certification with the highest standards of professional and technical information, as the knowledge of experts and scholars to study and research purposes. 

BraindumpsQA's 210-065 exam certification training materials are not only with high accuracy and wide coverage, but also with a reasonable price. After you buy our 210-065 certification exam training materials, we also provide one year free renewable service for you. We promise, when you buy the 210-065 exam certification training materials, if there are any quality problems or you fail 210-065 certification exam, we will give a full refund immediately.

With 400-101 test training materials of BraindumpsQA, you can put away with disorder emotion and clean up them. 400-101 test training materials of BraindumpsQA are the most accurate training materials in the current market. Using it, the passing rate of 400-101 exam is 100%. Choose BraindumpsQA is equal to choose success.

Our BraindumpsQA 400-101 certification exam information is suitable for all IT certification 400-101 exam. Its usability is fit for various fields of IT. BraindumpsQA's 400-101 exam certification training materials is worked out by senior IT specialist team through their own exploration and continuous practice. Its authority is undoubtdul. If there is any quality problem of 400-101 exam dumps and answers you buy or you fail 400-101 certification exam, we will give full refund unconditionally.

Exam Code: 400-101
Exam Name: CCIE Routing and Switching Written Exam v5.0
One year free update, No help, Full refund!
400-101 Real Questions Total Q&A: 750 Questions and Answers
Last Update: 09-21,2015

400-101 Test Questions Detail: 400-101 Real Questions

Exam Code: 210-065
Exam Name: Implementing Cisco Video Network Devices v1.0
One year free update, No help, Full refund!
210-065 Dumps PDF Total Q&A: 100 Questions and Answers
Last Update: 09-21,2015

210-065 Real Exams Detail: 210-065 Dumps PDF

400-101 Free Demo Download: http://www.braindumpsqa.com/400-101_braindumps.html

CCIE Routing and Switching Written Exam

Exam Number 400-101 CCIE
Associated Certifications CCIE Routing and Switching
Duration 120 Minutes (90 - 110 questions)
Available Languages English
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

The Cisco CCIE Routing and Switching written exam validate that professionals have the expertise to: configure, validate, and troubleshoot complex enterprise network infrastructure; understand how infrastructure components interoperate; and translate functional requirements into specific device configurations.

NO.1 Assume that the following MAC addresses are used for the bridge ID MAC address by four
different switches in a network. Which switch will be elected as the spanning-tree root bridge?
A. SwitchA uses MAC 1000.AA-AA-AA-AA-AA-AA.
B. SwitchB uses MAC 2000.BB-BB-BB-BB-BB-BB.
C. SwitchC uses MAC 3000.CC-CC-CC-CC-CC-CC.
D. SwitchD uses MAC 4000.DD-DD-DD-DD-DD-DD.
Answer: A

Cisco Exam PDF   400-101   400-101 exam simulations   400-101 Bootcamp   400-101 PDF VCE
Explanation:
The switch with the highest switch priority (the lowest numerical priority value) is elected as the root
switch. If all switches are configured with the default priority (32768), the switch with the lowest
MAC address in the VLAN becomes the root switch.
Reference.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/122_53_se/con
figuration/guide/2960scg/swstp.html

NO.2 Refer to the exhibit.
R1, R2, and R3 have full network connectivity to each other, but R2 prefers the path through R3 to
reach network 172.17.1.0/24. Which two actions can you take so that R2 prefers the path through R1
to reach 172.17.1.0/24? (Choose two.)
A. Set the reference bandwidth to 10000 on R1, R2, and R3.
B. Configure the cost on the link between R1 and R3 to be greater than 100 Mbps.
C. Set the reference bandwidth on R2 only.
D. Configure a manual bandwidth statement with a value of 1 Gbps on the link between R1 and R3.
E. Modify the cost on the link between R1 and R2 to be greater than 10 Gbps.
F. Configure a manual bandwidth statement with a value of 100 Mbps on the link between R1 and R2.
Answer: A,B

Cisco Exam Questions   400-101 pdf   400-101 Exam PDF
Explanation:
By default, the reference bandwidth used in Cisco routers is 100Mbps, so FastEthernet and above will
have a cost of 1, so a gigabit interface and 10GE interface will be equal with a fastethernet. This is not
ideal. If we change the reference bandwidth to 100000 then the faster links will be used. Changing
the reference bandwidth needs to be done on all routers in the OSPF network. Increasing the cost on
the R1-R3 link will also cause the traffic to take the more direct route.

NO.3 Which term describes an EIGRP route that has feasible successors?
A. active
B. passive
C. redistributed
D. invalid
Answer: B

Cisco Exam Questions   400-101   400-101 original questions   400-101 PDF VCE
Explanation:
A topology table entry for a destination can have one of two states. A route is considered in the
Passive state when a router is not performing a route recomputation. The route is in Active state
when a router is undergoing a route recomputation. If there are always feasible successors, a route
never has to go into Active state and avoids a route recomputation.
When there are no feasible successors, a route goes into Active state and a route recomputation
occurs. A route recomputation commences with a router sending a query packet to all neighbors.
Neighboring routers can either reply if they have feasible successors for the destination or optionally
return a query indicating that they are performing a route recomputation. While in Active state, a
router cannot change the next-hop neighbor it is using to forward packets. Once all replies are
received for a given query, the destination can transition to Passive state and a new successor can be
selected.
Reference. http://docwiki.cisco.com/wiki/Enhanced_Interior_Gateway_Routing_Protocol

NO.4 Which two statements about the default behavior of IS-IS are true? (Choose two.)
A. The default IS-IS router type is L1/L2.
B. The default IS-IS metric type is wide.
C. The default IS-IS interface circuit type is L1/L2.
D. By default, two IS-IS routers must use the same hello interval and hold timer in order to become
neighbors.
Answer: A,C

Cisco Actual Test   400-101 Exam Prep   400-101   400-101 study guide

NO.5 Which two statements about BGP prefix-based outbound filtering are true? (Choose two.)
A. It must be configured per address family.
B. It can use prefix lists and route maps for filtering.
C. It can be configured under the global BGP routing process.
D. It can be configured for external peering sessions only.
E. It can increase the processing load on the router.
F. It supports IP multicast routes.
Answer: A,D

Cisco test questions   400-101 test questions   400-101 exam   400-101 test

NO.6 A GRE tunnel is down with the error message %TUN-5-RECURDOWN:
Tunnel0 temporarily disabled due to recursive routing error.
Which two options describe possible causes of the error? (Choose two.)
A. Incorrect destination IP addresses are configured on the tunnel.
B. There is link flapping on the tunnel.
C. There is instability in the network due to route flapping.
D. The tunnel mode and tunnel IP address are misconfigured.
E. The tunnel destination is being routed out of the tunnel interface.
Answer: C,E

Cisco dumps   400-101 Actual Test   400-101   400-101 dumps   400-101 test   400-101 dumps torrent
Explanation:
The %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing error message
means that the generic routing encapsulation (GRE) tunnel router has discovered a recursive routing
problem. This condition is usually due to one of these causes:
Reference. http://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-
routingprotocol-eigrp/22327-gre-flap.html

NO.7 In which type of EIGRP configuration is EIGRP IPv6 VRF-Lite available?
A. stub
B. named mode
C. classic mode
D. passive
Answer: B

Cisco Exam Cram   400-101 dumps torrent   400-101   400-101 Real Questions

210-065 Real Questions: http://freedumps.vinhelp.com/pdf-vce-210-065-exam-dumps-testking-3600.html