Valid 70-698 Dumps shared by NewPassLeader for Helping Passing 70-698 Exam! NewPassLeader now offer the newest 70-698 exam dumps, the NewPassLeader 70-698 exam questions have been updated and answers have been corrected get the newest NewPassLeader 70-698 dumps with Test Engine here: http://https://www.newpassleader.com/Microsoft/70-698-exam-preparation-materials.html (130 Q&As Dumps, 30%OFF Special Discount: 30free )
NEW QUESTION NO: 12
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1. Computer1 has a virtual hard disk (VHD) named Disk1.vhdx.
Windows is installed on Disk1.vhdx. Disk1.vhdx is visible in File Explorer as drive E.
You need to configure Computer1 to start from Disk1.vhdx. Hardware virtualization must not be available when Computer1 starts from Disk1.vhdx.
What should you run?
A. Add-Windows Image
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-Windows Image
Answer: B
Section: (none)
Explanation/Reference:
Explanation:
https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/boot-to-vhd-- native-boot--add-a-virtual-hard-disk-to-the-boot-menu
NEW QUESTION NO: 13
IPv6 has a vastly larger address space than IPv4. This expansion provides flexibility in allocating addresses and routing traffic and eliminates the primary need for network address translation (NAT).
Do you know how many more bits there are in an IPv4 address compared to an IPv6 address?
A. 4 times more
B. 6 times more
C. Twice as many
D. 8 times more
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
https://techlog360.com/ipv4-vs-ipv6/
NEW QUESTION NO: 14
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer that has a dual-boot configuration. Windows 10 Pro is installed on the local disk.
Windows 10 Enterprise is installed in a VHDX file named Disk1.vhdx.
You start the computer to Windows 10 Pro, and then you download a driver package.
You need to ensure that the next time the Windows 10 Enterprise installation starts, the driver is installed already.
What should you run first?
A. Add-WindowsImage
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-WindowsImage
Answer: G
Section: (none)
Explanation/Reference:
Explanation:
https://technet.microsoft.com/en-us/library/dd799267(v=ws.10).aspx
NEW QUESTION NO: 15
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer that has a dual-boot configuration. Windows 10 Enterprise is installed on the local disk. Windows 10 Pro is installed in a VHDX file named Disk1.vhdx. Both of the installations are 64-bit versions.
You start the computer to Windows 10 Enterprise.
You need to ensure that you can install an unsigned driver to Windows 10 Pro when the computer starts in Windows 10 Pro.
What should you run?
A. Add-WindowsImage
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-WindowsImage
Answer: C
Section: (none)
Explanation/Reference:
Explanation:
http://www.drivethelife.com/windows-drivers/how-to-disable-driver-signature-enforcement-on-windows-10-
8-7-xp-vista.html#part3
NEW QUESTION NO: 16
Your networks contain a single Active Directory domain.
On a domain controller, an administrator creates a custom Microsoft Management Console (MMC) that uses the Active Directory Users and Computer snap-in.
The domain contains a computer named Computer1 that runs Windows 10. You use the computer to perform management tasks. You copy the custom MMC to the computer.
You need to ensure that you can use MMC and all of the features of the MMC.
What should you do on Computer1?
A. Enable the Sideload apps developer feature.
B. Install the Remote Server Administration Tools (RSAT).
C. Install the Microsoft Application Compatibility Toolkit (ACT).
D. Disable User Account Control (UAC).
Answer: B
Section: (none)
Explanation/Reference:
Explanation:
http://blogs.msmvps.com/acefekay/2012/08/24/delegate-active-directory-users-and-computers-aduc-then- create-a-custom-aduc-mmc/
NEW QUESTION NO: 17
A company has client computers that run Windows 10. The client computer systems frequently use IPSec tunnels to securely transmit data.
You need to configure the IPSec tunnels to use 256-bit encryption keys.
Which encryption type should you use?
A. 3DES
B. DES
C. RSA
D. AES
Answer: D
Section: (none)
Explanation/Reference:
Explanation:
https://en.wikipedia.org/wiki/Advanced_Encryption_Standard
NEW QUESTION NO: 18
You have a computer named Computer1 that runs Windows 10. Device Manager on Computer1 is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use Communications Port (COM1).
What should you do?
A. Update the driver for Communications Port (COM1).
B. Attach a device to Communications Port (COM1), and then click Scan for hardware changes.
C. Enable Communications Port (COM1).
D. Modify the IRQ and the I/O Range for Communications Port (COM1).
Answer: C
Section: (none)
Explanation/Reference:
Explanation:
https://support.microsoft.com/en-us/help/819036/overview-of-the-comdisable-tool
NEW QUESTION NO: 19
You have a laptop named Computer1 that runs Windows 10.
Computer1 connects to a wireless network named WiFi1 and a wireless network named WiFi2. WiFi1 has poor signal and the connection drops frequently. WiFi2 is available only during certain times of the day.
WiFi2 has a stronger signal that is more reliable than WiFi1.
You need to configure Computer1 to use WiFi2 whenever possible. WiFi1should be used when WiFi2 is unavailable.
Which three settings should you configure? Each correct answer presents part of the solution.
A. From the properties of WiFi2, select Connect even if the network is not broadcasting its name (SSID)
B. From the properties of WiFi1, select Connect automatically when this network is in range.
C. From the properties of WiFi1, select Enable WLAN connection settings.
D. From the properties of WiFi2, select Connect automatically when this network is in range.
E. From the properties of WiFi1, select Look for other wireless networks while connected to this network.
F. From the properties of WiFi2, select Look for other wireless networks while connected to this network.
Answer: B,D,E
Section: (none)
Explanation/Reference:
Explanation:
NEW QUESTION NO: 20
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows 10. User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
Ensure that you can test unsigned device drivers on Computer1
Enable Credential Guard on Computer2.
Run commands and cmdlets remotely on computer2.
Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when
elevated privileges are required.
Ensure that User1 can view and interact with a desktop session of User3.
Ensure that User2 can use Telnet to manage the mainframe.
Ensure that User4 can use Remote Desktop to access Computer4 remotely.
You need to meet the requirement for administering Computer2 remotely.
Which remote management technology should you use?
A. Windows PowerShell remoting
B. Telnet
C. PsExec
D. Remote Desktop
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
Explanation:
https://msdn.microsoft.com/en-us/powershell/scripting/core-powershell/running-remote-commands
NEW QUESTION NO: 21
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2.
User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1.
User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely.
Solution: You enable the Allow remote access to the Plug and Play interface Group Policy setting on Computer2.
Does this meet the goal?
A. Yes
B. No
Answer: B
Section: (none)
Explanation/Reference:
Explanation:
NEW QUESTION NO: 22
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows 10. User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
Ensure that you can test unsigned device drivers on Computer1.
Enable Credential Guard on Computer2.
Run commands and cmdlets remotely on Computer2.
Configure User Account Control (UAC) on Computer3 to prompt administrators for credentials when
elevated privileges are required.
Ensure that User1 can view and interact with a desktop session of User3.
Ensure that User2 can use Telnet to manage the mainframe.
Ensure that User4 can use Remote Desktop to access Computer4 remotely.
On Test_Server, you reset the password for User3.
You need to ensure that User3 can access ShareA.
Which tool should you instruct User3 to use on Computer3?
A. the Get-Credential cmdlet
B. Credential Manager
C. Authorization Manager
D. Active Directory Users and Computers
Answer: B
Section: (none)
Explanation/Reference:
Explanation:
http://www.digitalcitizen.life/credential-manager-where-windows-stores-passwords-other-login-details